|
Here is a chart of the component sizes,
standard heights, picket spacings, and
other pertinent data relating to our
fences: |
|
Component Sizes |
Residential Strength |
Ovation -
Regency |
Industrial
Strength |
|
Pickets |
5/8" sq. x .050" thick |
3/4 " sq. x .050" thick |
1" sq. x .062" thick |
Rails: Top Walls
Side Walls |
1" x .055" thick
1" x .082" thick |
1" x .055" thick
1 1/2 " x .082" thick |
1 5/8 " x .070" thick
1 5/8 " x .100" thick |
|
Standard Posts |
2" sq. x .060" thick |
2" sq. x .060" thick |
2 1/2 " sq. x .075" thick |
|
Gate Posts |
2" sq. x .125" thick
4" sq. x .125" thick |
2" sq. x .125" thick
4" sq. x .125" thick |
4" sq. x .125" thick
6" sq. x .125" thick |
|
Spacing Between Pickets |
3-13/16"
(1 5/8 " for 400 series) |
3-31/32" |
4"
(1-1/2" for 400 series)
|
|
Post Spacing |
72 1/2" on center |
72" on center |
71 1/2" on center |
|
Heights Available* |
36", 48", 60", 72", 54"*, 57"* |
48", 60", 72", 54"* |
48", 60", 72", 96" |
|
Standard Colors |
Black, White, Bronze |
Black, White, Bronze |
Black, White, Bronze |
|
Weight Supported |
350+ lbs. per section |
350+ lbs. per section (Ovation);
500+ lbs. per section (Regency) |
1,000+ lbs. per section |
*Residential
fence is also available in a 54"
height as a modified Style #200 and
#202, and a 57" height as a modified
Style #111, Style #101 and Lexington
& Concord to meet most pool codes.
Regency fence is available in a 54"
height in Windsor and Windsor Plus
styles. Ovation is only 48" high.
Click on the
fences below for more detailed
information about Jerith's aluminum
fence lines.
|
|
Jerith's
Exclusive HS-35™
Aluminum Alloy
has the Strength
of Steel Without
the Rust. |
You no
longer have to
choose between
the
maintenance-free
ease of aluminum
and the strength
of steel for
your fence. The
best of both
worlds is
available only
from Jerith.
Through
extensive
research and
testing, Jerith
has developed an
aluminum alloy
called HS-35.
This remarkable
material has the
strength of
steel without
the rust!
Our HS-35 Alloy
has a minimum
yield strength
of 35,000 pounds
per square inch
(psi), which is
significantly
higher than the
25,000-33,000
psi strength
found in most
steel fences.
Even more
impressive is
Jerith's
advantage over
other aluminum
fences, which
have yield
strengths of
only 16,000 psi.
Every post and
rail in Jerith
aluminum fences
is extruded from
our exclusive
HS-35 Alloy.
While some
aluminum fence
manufacturers
claim to use
similar alloys,
they seldom use
it in both their
posts and rails
like we do. In
addition, Jerith
is the only
manufacturer
that uses a high
strength alloy
in its pickets.
Our pickets are
over 50%
stronger than
any other
aluminum fence.
We don't cut
corners on the
strength of our
products!
An independent
testing
laboratory has
proven that a
typical Jerith
Residential
Fence can
support over 350
pounds per
section without
any structural
failure and our
Industrial fence
can hold over
1,000 pounds!
With strength
like this,
Jerith fences
will certainly
satisfy your
fencing needs
for years to
come.
Always look for
our logo on the
sections, post
caps, and gates
to ensure that
you are
receiving Jerith
quality and our
exclusive HS-35
Alloy. Other
fences may look
like Jerith, but
none are as
strong, durable
or well-built as
ours.
|
|
FencCoat
- Jerith's
Powder Coated
Finish |
Jerith's
technologically-advanced
powder coating
system allows us
to produce a
high quality,
long-lasting
finish which is
also
environmentally
friendly. When
applied to a
Jerith fence,
FencCoat is
twice the
thickness and
hardness of a
typical acrylic
(or "wet paint")
finish.
Consequently, it
is far more
durable,
fade-resistant,
and
scratch-resistant
than other
coatings.
Since its
introduction in
North America
almost 40 years
ago, powder
coating has
become the
fastest growing
finishing
technology.
Powder coating
contains no
solvents and
therefore emits
negligible
amounts of
volatile organic
compounds
(VOC's) into the
atmosphere. Wet
paints, however,
cause severe
pollution, both
through the
emission of
VOC's when they
are cured and by
the generation
of excess paint
which is
considered a
hazardous waste.
In addition,
Jerith's
aluminum is
prepared for its
FencCoat finish
with an
environmentally
safe
pretreatment,
unlike most wet
paints.
To prove the
durability of
our powder
coating, we have
tested it
extensively.
FencCoat endured
3,000 hours of
harsh salt-spray
and humidity
resistance, as
well as 5 years
of continuous
exposure in
Florida. Other
aluminum fence
manufacturers
have performed
similar tests on
their own
coatings, yet
they only
survived 1,000
hours of
salt-spray and
humidity testing
and 1 year of
Florida exposure
(as stated in
their
literature).
That is why we
are confident
enough to
guarantee
that our
FencCoat finish
will last for as
long as you own
your Jerith
aluminum fence.
|
|
Jerith
offers a proud
tradition of
service and
quality to our
customers. |
Jerith
is a family
business that is
now in its third
generation. We
are the oldest
and largest
manufacturer of
aluminum
ornamental
fences in North
America.
Decorative
fences
constructed from
aluminum were
first designed
and manufactured
by Jerith in
1961. Since that
time, we have
become a leader
in the fencing
industry. We are
known for our
high quality
products and
outstanding
service.
We are a
participating
member in many
organizations
which promote
product
excellence, such
as A.S.T.M., the
Powder Coating
Institute, and
the American
Fence
Association. In
1995, Jerith was
one of only four
companies
selected
nationally to
receive the
prestigious
American
Business Ethics
Award from the
American Society
of CLU & ChFC.
Jerith offers a
proud tradition
of quality and
service to our
customers. We
are confident
and proud that
our fences are
built to the
highest
standards in the
industry. That
is why we were
the first fence
manufacturer to
give a
Lifetime
Warranty
on every
aluminum fence
system we sell.
No other fence
manufacturer can
match our
combination of
experience,
quality and
service.
|
|
-TOP- |
_
|
|
|
